Solar Screen Daylight Filters
For more information about SolarScreen Daylight Filters, please visit the SolarScreen website
Glass is a weak link in building climate control. On the one hand, a lot of light is often desired; on the other hand, too much light can be a very hindering factor for performing efficient work. For situations where light dosage is important, Glasfolie Suncontrol developed a flexible solution; SolarScreen Daylight Filters. These glass film screens are made of polyester layers with a reflective layer of metal particles between them with or without a reinforcing punch. SolarScreen Daylight Filters are made in the form of blinds and slats.
No more annoying glare
Due to their light-absorbing ability, glass film screens are the solution against annoying glare. The tint and metal particles filter daylight. It maximizes screen visibility, even close to the window.
When annoying sunshine is absent, the screen can be operated. Even application with attractive cassette and/or side guides is possible. The product can be applied in many ways and very flexibly.
The additional beneficial properties of SolarScreen daylight filters
Solar Screen
gives windows excellent sun and heat protection properties.
SolarScreen daytime solar filters also ensure your privacy. During the day, the film obstructs views into offices and buildings.
Insulation
Finally, screens ensure that in the winter the heat from your heating system is reflected, saving on your energy budget. In addition, when your building is air conditioned, the energy use in the summer is significantly lower due to the better insulation of your windows through the use of our screens.
No building is alike
Because there are differences in climate and because each building has different requirements, Glasfolie Suncontrol has developed a range of screens and louvers with different light and sun protection properties.
Applications
Screens can be used on glass where the permanent application of glass film is not desired. Well-known applications include control rooms, offices, airports, and any other building where flexible light transmission and proper shading is desired or necessary.
Screens are installed on the inside, both in and on the frame. Excellent applications are places where the light must be well dosed such as:
– Factories of light or reflective products such as plastics and light metals.
– Work situations with cutting and punching machines or printing presses.
Cleaning: The strong polyester film that the screen is made of resists cleaning well. The best cleaning agent is clean water with a splash of household vinegar. The best tools: a clean sponge and chamois. Beware of grains of sand!
Detailed cleaning instructions are provided to you upon delivery of the systems.
Dimensions: Screens are available from 50 cm or smaller, up to a maximum of 3 meters wide or 3.5 meters high, and are custom-made. From larger width/height than 182 cm, it is necessary to apply a weld in the material.
A cassette can be supplied at extra cost (in any RAL color). Technical data
Thickness: The glass film has a thickness of about 3.0 mil (75 microns) and optionally provided with a reinforcing punch.
Lightfastness: Glass film screens do not discolor; their lightfastness is unsurpassed.
Operation: The operation comes on the left or right side by means of a cord. The screens can also be equipped with an electric motor, with switch or wireless remote control.
Side guide: Standard side guide is not required. Available for open windows at an additional cost.
Warranty: glass film Suncontrol provides up to 5 years manufacturer’s warranty on the system and quality of interior glass film screens we install.
