HEAT REJECTION ON SHIPS AND CONTROL ROOMS

Specifically for control rooms, wheel-houses of ships, or traffic control towers, the Window Film Screen comes in type Grey 20 Flat.

This film is a crystal clear polyester film that is applied on the inside of the glass. The product is entirely transparent. There is no distortion of the image. This ensures the full see-through to outside.

binnenvaart

Film Type GREY 20 Flat has a low light transmittance, and that’s why it has an excellent light filtering effect. By applying this high quality system, a good solution is available for virtually any situation. The product is also very versatile. The basic system is controlled manually, but because of the economic purchase price it is usually applied as an electric system – possibly fitted with ‘tailor made’ accessories. Accessories such as: wireless remote control, group division light sensor etc. Also, the systems can be matched in RAL-colours for the existing frames and fitted with lateral guidance.

A safe see-through is no longer an issue. This is ensured by a good warranty and short lead-time, in case of amendments.

stena

Application areas
The screens can be used on glass where the permanent application of Window film is not desired. Common applications are control rooms, offices, airports and any other buildings where flexible light transmittance and good heat rejection is desired or required. The screens can be applied on the inside, as well as on the frame.
 Excellent application possibilities are locations where the light has to be dosed properly such as:
– wheel-houses of ships
– bridge control buildings
– weighbridges
– control rooms
– traffic control towers

 

scheepraam2   scheepraam
tabel-zonwerende-schepen

Cleaning: the strong polyester film is very cleaning resistant. The best cleaning solution is clean water with a dash of household vinegar. The best tools: a clean sponge and chamois. Watch out for sand! Detailed cleaning instructions are provided to you at the delivery of the system.
Dimensions: the screens are available from 50 cm or smaller, to maximally 3 metres wide or 3.5 metres high and are tailor made.
For widths/heights over 182 cm, a seam has to be made in the material. A cassette can be supplied at a surcharge (in any RAL colour).
 Technical details Thickness: Window Film Screens have a thickness of approx. 3.0 mil (75 microns).

Light-fastness: Window Film Screens do not discolour; the light-fastness is unmatched.
Control: The control is on the left or on the right, by means of a cord. The screens are also fitted with an electric motor.
Lateral guidance:
Standard lateral guidance is not required. For an additional charge, this is available for opening windows.
Warranty:
Glasfolie Suncontrol gives up to 5 years manufacturer warranty on the system and the quality of Window film-screens applied on the inside, by us.

schip