Energy Saving HR Window Film: the ultimate 4 seasons Window Film

After applying this unique and innovative Window Film, single glazing will transform into double glazing and double glazing will even transform into HR(++) glass. The results are overwhelming. Please consult our climate experts about the possibilities.


From now on, upgrading poorly insulated glass is possible without new glazing! And the relatively low investment will quickly pay for itself.

Due to the unique composition of Energy Saving HR Window Film, as much as 75% of the solar heat in summer is reflected outward, which results in a significant temperature reduction. In winter the heat generated from the heating system is reflected back into the room. This provides up to 92% additional insulation in winter.

Obviously, this ensures the maximum energy saving throughout the year. A significant cost reduction!


Energy Investment Tax Credit (Energy Investeringsaftrek; EIA)

Benefit directly from the Energy Investment Tax Credit. The Energy Investment Tax Credit is a fiscal tax credit scheme that offers direct financial advantage to entrepreneurs who invest in energy saving equipment and sustainable energy.



Because each office or company has its own particular needs, Glasfolie Suncontrol has developed a series of films with different, specific sun protection properties. Whatever your situation, there is a Window Film to meet your needs.



Everywhere high transparency is required and anywhere efficient sun protection is desired, Window Film can be applied. Energy Saving HR Window Film is applied on the glass of shops, offices, hotels, restaurants, schools, institutions, etc. The glass film is primarily applied to the inside of windows. Most types can be applied on double glazing. For outside use, Glasfolie Suncontrol offers special types of film.

Energy Saving HR Window Film passes on less than 5% ultraviolet radiation, measured at radiation in the field of 280 and 380 nm.

The solar heat gain coefficient is the ratio of the amount of solar heat that a glass surface passes on and the amount of solar heat that falls on that glass surface and radiates inwards.

Glasfolie Suncontrol has carefully documented the figures for you, but cannot be held liable for any incorrect data.

Glasfolie Suncontrol has its own application service. Besides having experience in applying the film, our employees also have the right equipment. They only apply the film when the temperature of the surface is between 5 and 25 degrees Celsius. After approximately one month, optimal adhesion is achieved and the film is completely tightened and fixed to the glass.
The strong polyester film is very resistant to cleaning. The best cleaning agent to use is clean water with a dash of household vinegar. The best tools: a clean sponge and chamois. Watch out for sand grain and old, hardened rubber squeegees! Other sharp tools can also cause damage. Aggressive cleaning chemicals are not recommended. Detailed cleaning instructions are supplied with the delivery of the film.
The width of the roll the film is supplied in is 152 cm. This means that when processing the film, the maximum width of a window is approximately 150 cm. But if your windows are higher and wider, the film can still be applied. For larger windows a minimally visible seam is required when our experts apply the film.

Glasfolie Suncontrol has carefully documented the figures for you, but cannot be held liable for any incorrect data.