Solar Screen Daylight Filters
For more information about SolarScreen Daylight Filters, please visit the SolarScreen website
Glass is a weak link in the climate control of buildings. On the one hand, a lot of light is often desired; on the other hand, too much light can be a very hindering factor for carrying out efficient work. For situations where light dosage is important developed Glass film Suncontrol a flexible solution; SolarScreen Daylight Filters. These glass film screens are made of polyester layers with a reflective layer of metal particles in between, with or without a reinforcing punch. SolarScreen Daylight Filters are made in the form of blinds and slats.
No more annoying glare
Because of their light-absorbing ability, glass film screens are the solution against annoying glare. The tint and metal particles filter daylight. As a result, the view of screens is maximally improved, even close to the window.
When annoying sunshine is absent, the screen can be operated. Even application with an attractive cassette and/or side guide is possible. The product can be applied in many ways and very flexibly.
The additional beneficial properties of SolarScreen daylight filters
Solar Screen gives the windows excellent solar and thermal properties.
SolarScreen daytime solar filters also take care of your privacy. During the day, the film blocks views into offices and buildings.
Insulation
Finally, screens ensure that in the winter the heat from your heating system is reflected, thus saving on your energy budget. In addition, if your building is air-conditioned, energy use in the summer is significantly lower due to the better insulation of your windows through the use of our screens.
No building is alike
Because there are differences in climate and because each building has different requirements, Glasfolie Suncontrol has developed a range of screens and louvers with different light and sun protection properties.
Applications
Screens can be used on glass where the permanent application of glass film is not desired. Well-known applications include control rooms, offices, airports, and any other building where flexible light transmission and proper shading is desired or necessary.
Screens are installed on the inside, both in and on the frame. Excellent applications are places where the light must be well dosed such as:
- Factories of light or reflective products such as plastics and light metals.
- Work situations with cutting and punching machines or printing presses.
Cleaning: The strong polyester film that the screen is made of resists cleaning well. The best cleaning agent is clean water with a splash of household vinegar. The best tools: a clean sponge and chamois. Beware of grains of sand!
Detailed cleaning instructions are provided to you upon delivery of the systems.
Dimensions: Screens are available from 50 cm or smaller, up to a maximum of 3 meters wide or 3.5 meters high, and are made to measure. From larger widths/heights than 182 cm, it is necessary to apply a weld in the material.
A cassette can be supplied at extra cost (in any RAL color). technical data
Thickness: The glass film has a thickness of about 3.0 mil (75 microns) and may have a reinforcing punch.
Lightfastness: Glass film screens do not discolor; their lightfastness is unsurpassed.
Operation: Operation is supplied on the left or right by means of a cord. The screens can also be equipped with an electric motor, with switch or wireless remote control.
Side guide: Standard side guide is not required. Available for open windows at additional cost.
Warranty: Glass film Suncontrol provides up to a 5-year manufacturer's warranty on the system and quality of interior glass film screens we install.