Energy-saving HR Glass Film

Energy-saving HR(++) Glass film

Saving energy with window film? After installation of this unique innovative energy-saving HR Glass Film, single glass will turn into double glass; double glass will even turn into HR(++) glass. The results are overwhelming. Get comprehensive advice from our climate experts about the possibilities and request a no-obligation quote!

Insulating HR(++) glass film also benefits in summer

Upgrading poorly insulated glass can now be done without new glazing! The relatively low investment pays for itself quickly. Due to the unique composition of Energy Saving HR Glass Film, as much as 75% of the sun’s heat is reflected outward in the summer resulting in a considerable temperature reduction. In winter, the heat generated from the heater, among other things, is reflected back into the room. This provides up to 92% extra insulation in winter. This, of course, maximizes energy savings throughout the year. A big cost savings! HR glass film offers benefits in winter and summer!

More information

Download PDF

Benefits of HR(++) window film in winter

  • Less moisture on the windows

    Due to the insulating effect of the film on the windows, moisture is less likely to stay on the window.

  • Energy saving

    Because the heat is kept inside and does not dissipate quickly from the home, a huge amount of energy is saved.

  • Temperature increase

    With HR(++) window film, you ensure that much more heat is kept inside and the temperature is relatively higher than without the film on the windows.

  • Low cost

    Glass film is a relatively inexpensive alternative to glass replacement.

  • Easy to install and remove

    The glass film is easy to place on windows. It is also additionally easy to remove if you are moving and the home needs to be returned to its original state.

Energy Investment Deduction for Energy Saving HR Glass Film.

Also benefit directly from the EIA (Energy Investment Allowance). The EIA is a tax deduction program. The scheme offers direct financial benefits to entrepreneurs who invest in energy-saving assets and renewable energy.

Having HR Glass Film Installed

Glasfolie Suncontrol has its own application service. In addition to experience in application, our staff has the right equipment. They apply the film only when the temperature of the substrate is between 5 and 25 degrees Celsius. After about one month, optimal adhesion is achieved and the film is completely tightened.

Have HR Glass Film installed or need some advice first? Request a quote with no obligation!

HR Glass film cleaning

The strong polyester film resists cleaning well. The best cleaning agent is clean water with a splash of household vinegar. The best tools: a clean sponge and chamois. Beware of sand grains and old hardened rubber tractors! Other sharp tools can also cause damage. Sharp cleaning chemicals are discouraged. Detailed cleaning instructions will be provided to you upon delivery of the film.

Custom insulating HR film

Because every office or business has its own set of problems, Glasfolie Suncontrol developed a series of films with several specific solar control properties.
There is also a Glass film available for your situation that guarantees the optimum effect.

The width of the roll on which the film is delivered is 152 cm. This means that when the film is processed, the maximum width of a window is about 150 cm. However, the film can also be applied if your windows are taller and wider. With larger windows it is necessary to apply a seam which is minimally visible with our skilled processing.

Glassfoil Suncontrol has carefully documented the figures for you, but cannot take responsibility for unexpected incorrect entries.

Applications HR Glass Film

Overal waar een grote lichtdoorlaatbaarheid gewenst is, maar waar ook efficiënte zonwering wordt verlangd kan glasfolie worden toegepast. Energy Saving HR Glass Film is applied to the glass of stores, offices, hotels, restaurants, schools, institutions and so on. The glass film is applied in princi pe on the inside of the window. Ook op dubbele beglazing zijn de meeste soorten zonder meer toe te passen. For outdoors, Glasfolie Suncontrol has special types available.

UV Transmission

Energy-saving HR Glass Film allows less than 5% ultraviolet radiation through, measured at radiation in the 280 and 380 nm range.

ZTA (Absolute Solar Accession Factor).

The absolute solar transmittance factor is the ratio of the amount of solar heat passing through a glass surface to the amount of solar heat falling on that glass surface and radiating inward.

Glassfoil Suncontrol has carefully documented the figures for you, but cannot take responsibility for unexpected incorrect entries.

Reference addresses

For applications of the various film types, we have reference addresses at hand, which we will gladly make available to you.

More information

Download PDF