Unreflective Glass Film

Clear vision with anti-reflective glass film

Without windows, display cases and shop windows have little effect. Through the windows, the items or objects should be easy to admire. Good transparency is therefore incredibly important. In many cases, annoying reflection causes quite a bit of irritation and hinders a good view. Glasfolie Suncontrol developed the Unreflective Glassfoil to eliminate this unwanted glare. The Unreflective Glass Film provides a clear image

More information

Download PDF

The Benefits of Anti-Glare Glass Film

  • Safety

    Unreflective Glass Film increases safety around windows. At
    explosion or vandalism, the glass film prevents damage and injury caused by flying
    shards can cause. In addition, the film has a fire retardant
    operation. Because of its strength and binding ability, Non-Mirrored Glass Film is also burglar retardant.

    The Anti-Glare Glass Film has been extensively tested according to “Class B” NEN 3569
    fall-through protection and can also be applied under the HaCCP, BRC
    and IFS.

  • UV protection

    The glass film filters ultraviolet radiation from sunlight. This protects your precious interior and items from unwanted discoloration.

  • Extra scratch resistant

    A special top coat makes the film extremely scratch-resistant, making it even more resistant to abrasion.

  • Guaranteed results!

    The Anti-Glare Glass Film delivers a 95% guaranteed anti-reflective performance at
    single glass up to 6 mm thick. Applications to double glazing may be pre-tested on a situation-by-situation basis.

No building is alike

Because every building has its own problems, Glasfolie Suncontrol developed an Unreflective Glass Film with several safety and solar control properties.

Applications

Unreflective Glass Film can be used on all glass of stores, museums, showrooms and in all other buildings where annoying reflections obstruct free vision. The glass film is designed to be applied on the inside of single glass.

Technical data

Thickness
Reflective Glass Film has a thickness of about 4 mil (100 microns)

Lightfastness
Unreflective Glass Film does not discolor; its lightfastness is unsurpassed.

Flammability
Once glass film is applied, it is very difficult to ignite. In the process, the Unreflective Glass Film still reflects heat radiation for quite some time. In case of fire, the film retains the cracked glass for some time.

Sustainability
Durability in indoor applications is virtually unlimited. Special types are available for exterior mounting.

Warranty
Glass Foil Suncontrol provides a 5-year manufacturer’s warranty on delaminating and demetalization of glass foil applied by us on the inside.

UV Transmission

The above film type allows less than 5% ultraviolet radiation through, measured at radiation in the 280 and 380 nm range.

ZTA (Absolute Solar Accession Factor).

The absolute solar transmittance factor is the ratio of the amount of solar heat passing through a glass surface to the amount of solar heat falling on that glass surface and radiating inward.

Glassfoil Suncontrol has carefully documented the figures for you, but cannot take responsibility for unexpected incorrect entries.

Reference addresses

For applications of the various film types, we have reference addresses at hand, which we will gladly make available to you.

Apply
Glasfolie Suncontrol has its own application service. In addition to experience in application, our staff has the right equipment. They apply the film only when the temperature of the substrate is between 5 and 25 degrees Celsius. After about one month, optimal adhesion is achieved and the film is completely tightened.

Cleaning
The strong polyester film resists cleaning well. The best cleaner is clean water with a splash of household vinegar. The best tools: a clean sponge and chamois. Beware of sand grains and old hardened rubber tractors! Also, other sharp
tools may cause damage. Sharp cleaning chemicals are discouraged. Detailed cleaning instructions will be provided to you upon delivery of the film.

Dimensions
The width of the roll on which the film is delivered is 120 cm. This means that when the film is processed, the maximum width of a window is about 120 cm. But even if your windows are taller and wider, the film can be applied. For larger windows, it is necessary to apply a seam which, with our expert processing
minimally visible.

More information

Download PDF